ClearSpan 108986 매뉴얼 - 페이지 6

{카테고리_이름} ClearSpan 108986에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 108986 17 페이지. End frame kit 36' wide x 16' 2" high

CLEARSPAN

END WALL FRAMING KITS

™

INSTALL THE END FRAME (CONTINUED)

5. Plumb the vertical frame tube and use wooden stakes or other means to anchor it in place.

6. Repeat the steps to construct, attach, and set the remaining end frame tubes.

7. Verify that all end frame tubes are plumb and spaced as needed.

8. Add concrete to each hole and allow to set. Concrete should remain a few inches below the finished grade.

9. After assembling end frame, inspect frame for sharp edges and bolts that could damage end panel (if equipped) or

main cover when it is pulled back into place. Tape over or file the sharp edges as needed.

10. Install end panel if equipped. (Additional purchase required for end panels and doors.)

NOTE: If covering the end frame with something other than an end panel, install that material now and then secure

the main cover of the shelter.

2" x 2" Tubes

Finished Grade

2" x 2" Tubes

Concrete Pier

Revision date: 11.12.14