ClearSpan 108986 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} ClearSpan 108986. ClearSpan 108986 17 pagina's. End frame kit 36' wide x 16' 2" high

CLEARSPAN

END WALL FRAMING KITS

™

INSTALL THE END FRAME (CONTINUED)

5. Plumb the vertical frame tube and use wooden stakes or other means to anchor it in place.

6. Repeat the steps to construct, attach, and set the remaining end frame tubes.

7. Verify that all end frame tubes are plumb and spaced as needed.

8. Add concrete to each hole and allow to set. Concrete should remain a few inches below the finished grade.

9. After assembling end frame, inspect frame for sharp edges and bolts that could damage end panel (if equipped) or

main cover when it is pulled back into place. Tape over or file the sharp edges as needed.

10. Install end panel if equipped. (Additional purchase required for end panels and doors.)

NOTE: If covering the end frame with something other than an end panel, install that material now and then secure

the main cover of the shelter.

2" x 2" Tubes

Finished Grade

2" x 2" Tubes

Concrete Pier

Revision date: 11.12.14