Dixon Bayco 6500X 설치 및 운영 지침 - 페이지 3

{카테고리_이름} Dixon Bayco 6500X에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Bayco 6500X 5 페이지.

6200X and 6500X Tall Drop Elbows

This elbow is designed for use with standard 4" top seal service

station adapters. To properly operate and maintain your Dixon Bayco

6200X series elbow the following instructions are provided. Please

read with care as improper handling or maintenance may cause a

hazardous condition.

Do not modify your Dixon Bayco 6200X / 6500X series

elbow for any reason. It can result in a hazardous condition due

to operating difficulties or operation malfunction. Disassembly

or tampering will void the product warranty.

Never smoke or allow an open flame near your dispenser when

handling volatile materials such as gasoline and fuels. An explosion

could result. Remember safety is everyone's business.

Installation

1. When the Dixon Bayco 6200X / 6500X elbow is shipped, the sight

glass and gaskets are attached in a plastic bag attached to the

elbow. These must be installed with the required mating Bayco inlet

(3" or 4" male or female purchased separately).

2. Take the sight glass and gaskets out of the plastic bag and place

one gasket inside the elbow inlet end and make sure it is sealed

evenly.

3. Carefully (keep straight) slide the sight glass into the inlet end and

onto the installed gasket.

4. Place the other gasket inside the inlet and on the sight glass.

5. Attach the mating inlet using the four socket head cap screws

supplied.

6. Coat the cap screws with anti-seize compound.

Lubricate Stem

This product has been assembled with anti-seize compound and

lubricated for easy maintenance and trouble-free service. However,

we recommend lubricating the stem through the grease nipple using

lithium based or quality automotive type grease prior to service. It is

recommended to apply lubricant to grease nipple, cam arm bearings,

and other moving parts every month. Monthly inspection and

lubrication become mandatory for items that are seldom used.

Condensation, rain and road salts can cause corrosion build-up and

binding when product not in use.

6200X & 6500X

090086 R6