ClearSpan 3640CC 사용 설명서 - 페이지 5

{카테고리_이름} ClearSpan 3640CC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 3640CC 12 페이지. Poly shelters 36' and 54' wide x 20', 30', 40', 50', 60' long

페이지 인쇄

Section B - Rafter Assembly

Step 1: Locate the 8 sections of pipe to make an end rafter. This will include (2) leg extensions, (2)

legs, (2) rafter sections "A", and (2) rafter sections "B", Also locate a 3-way coupler and

(2) cross connectors.

Step 2: Add a cross connector to one side of every "A" pipe section. This will be used to secure the

purlin during frame assembly later on.

Step 3: Start at the coupler and add sections to form a house-shaped arch like the one below laying

flat on the ground. It is essential that you perform this step on level ground or the completed

rafter assembly will be twisted.

Step 4: Repeat the steps above to assemble the other end rafter identical to the first.

Step 5: Repeat the steps above to assemble the inside rafters similar to the first but using a 4-way

coupler at each peak instead of the 3-way couplers used at the ends.

Typical End Rafter Assembly

Page 5