ClearView Easy Slide 설치 및 사용 설명서 - 페이지 2

{카테고리_이름} ClearView Easy Slide에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView Easy Slide 6 페이지.
ClearView Easy Slide에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (16 페이지)

페이지 인쇄

Thank you for purchasing a Clearview Easy Slide. We are sure you will find the quality made product a huge

asset in your vehicle's storage system.

The Easy Slide is designed to give the user better access to their fridge or freezer in the storage

compartment of their vehicle. No longer is it a struggle to see and reach into the fridge unit, as the Clearview

Easy Slide enables you to safely adjust the position of the fridge for the best access when needed, and

securely stow your fridge for the road.

IMPORTANT

The Clearview Easy Slide should only be mounted to a solid, fixed, flat timber/metal surface.

Do not attempt to fit the Easy Slide to an existing inbuilt fridge slide, warranty on the Easy Slide will be

made void if attempted.

This guide is for fitting a Clearview Easy Slide to a vehicle drawer system. Some assembly of the slide is

required prior to installation, as it has been partially dismantled for packaging and freight.

Please remove any cargo barrier dividers or shelving over the drawer system and ensure there are no tie

down lugs under the proposed positioning of the slide. Please also ensure the top of the mounting surface is

flat and free from debris. Leave plastic sleeves on gas struts for protection during assembly.

Description

M8 x 32 Mounting Plate

M8 Flat Washer

M8 Nyloc Nut

M10 x 16 Button Head Bolt

M10 Flat Washer

Timber Screw

Easy Slide Plastic Chock

6mm Hex Key

Fridge Strap

Page | 2

Due to Clearview Continuous Improvement Program, information may change without notice.

Clearview takes no responsibility for the result of incorrect use of these installation instructions.

Quantity