ClearView POWER SLIDE 조립 지침 매뉴얼 - 페이지 12
{카테고리_이름} ClearView POWER SLIDE에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView POWER SLIDE 16 페이지.
페이지 인쇄
Installing your fridge
Installing and securing a fridge to the Power Slide™.
Lower the Power Slide™ and place your fridge into the Power Slide tray, ensuring best
access to controls, power socket and lid.
The Power Slide™ has provisions for four tie-down straps, one in each corner of the fridge
tray.
An additional strap bracket is included on the tray, should you choose to use this as a tie
down point instead.
To secure fridge, hold the strap by the buckle above the Power Slide™ and feed the loose
end of the strap down through the tie down point and through the Power Slide™ strap
provision from inside to out.
Then thread the loose end of the strap through the cam buckle from behind, keep pulling
the strap through and in a downward direction while holding cam buckle to tighten strap.
Repeat this process on remaining tie down straps.
For rear tie down straps, ensure the buckles are facing inwards (towards the fridge) to
avoid creating a 'catch point' that may inhibit vertical movement of the Power Slide™.
IMPORTANT - When fitting a fridge to the Power Slide, always use quality tie-
down straps and never travel with the fridge unrestrained.
clearviewaccessories.com.au
12