ClearView POWER SLIDE Instrukcja montażu - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria samochodowe ClearView POWER SLIDE. ClearView POWER SLIDE 16 stron.

Installing your fridge

Installing and securing a fridge to the Power Slide™.

Lower the Power Slide™ and place your fridge into the Power Slide tray, ensuring best

access to controls, power socket and lid.

The Power Slide™ has provisions for four tie-down straps, one in each corner of the fridge

tray.

An additional strap bracket is included on the tray, should you choose to use this as a tie

down point instead.

To secure fridge, hold the strap by the buckle above the Power Slide™ and feed the loose

end of the strap down through the tie down point and through the Power Slide™ strap

provision from inside to out.

Then thread the loose end of the strap through the cam buckle from behind, keep pulling

the strap through and in a downward direction while holding cam buckle to tighten strap.

Repeat this process on remaining tie down straps.

For rear tie down straps, ensure the buckles are facing inwards (towards the fridge) to

avoid creating a 'catch point' that may inhibit vertical movement of the Power Slide™.

IMPORTANT - When fitting a fridge to the Power Slide, always use quality tie-

down straps and never travel with the fridge unrestrained.

clearviewaccessories.com.au