ClearView PowerBoards PB-DG-001 설치 및 사용 설명서 - 페이지 9

{카테고리_이름} ClearView PowerBoards PB-DG-001에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView PowerBoards PB-DG-001 9 페이지. For ram 1500 pick-up truck 2015-2018

페이지 인쇄

Operation of Clearview Power Boards

Normal Operation: Clearview Power Boards will deploy automatically when vehicle door is opened and

retract when door is closed.

Manual Operation: On occasions you may want the Clearview Power Boards to be deployed even when

vehicle door is closed to access vehicle roof. To do this, open vehicle door first so Clearview Power Boards

are deployed. Step your foot on the running board and close your vehicle door at the same time, the

Clearview Power Board should remain deployed. To reset, open and close your vehicle door again.

Reset Clearview Power Boards: Clearview Power Boards are equipped with a safety cut off feature in the

case where normal operation is obstructed. To resume operation, simply clear the obstruction, open and

close vehicle door. Although Clearview Power Boards is equipped with the safety cut off feature, we strongly

advise to keep hands and feet away from moving components when Power Boards are in operation.

Maintenance: Over time, debris such as mud, dirt and salt may build up on moving components of Power

Boards, leading to unwanted noise and reduced performance. If this occurs, manually deploy the Power

Boards and remove debris. Silicone lubricant spray may also be applied to hinges.

Page | 9

Due to Clearview Continuous Improvement Program, information may change without notice.

Clearview takes no responsibility for the result of incorrect use of these installation instructions.

PB-TA-001

PB-DG-001

April 2018