ClearView PowerBoards PB-DG-001 Посібник з встановлення та експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Автомобільні аксесуари ClearView PowerBoards PB-DG-001. ClearView PowerBoards PB-DG-001 9 сторінок. For ram 1500 pick-up truck 2015-2018
Друкувати сторінкуOperation of Clearview Power Boards
Normal Operation: Clearview Power Boards will deploy automatically when vehicle door is opened and
retract when door is closed.
Manual Operation: On occasions you may want the Clearview Power Boards to be deployed even when
vehicle door is closed to access vehicle roof. To do this, open vehicle door first so Clearview Power Boards
are deployed. Step your foot on the running board and close your vehicle door at the same time, the
Clearview Power Board should remain deployed. To reset, open and close your vehicle door again.
Reset Clearview Power Boards: Clearview Power Boards are equipped with a safety cut off feature in the
case where normal operation is obstructed. To resume operation, simply clear the obstruction, open and
close vehicle door. Although Clearview Power Boards is equipped with the safety cut off feature, we strongly
advise to keep hands and feet away from moving components when Power Boards are in operation.
Maintenance: Over time, debris such as mud, dirt and salt may build up on moving components of Power
Boards, leading to unwanted noise and reduced performance. If this occurs, manually deploy the Power
Boards and remove debris. Silicone lubricant spray may also be applied to hinges.
Page | 9
Due to Clearview Continuous Improvement Program, information may change without notice.
Clearview takes no responsibility for the result of incorrect use of these installation instructions.
PB-TA-001
PB-DG-001
April 2018