ClearView RT-RT110 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} ClearView RT-RT110에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView RT-RT110 20 페이지.

Assembly Instructions

Rock Tamers Trim Plate

100mm

Rod End Cap

Flap Support Rod

Flap Clamp

curved

clearviewaccessories.com.au

Flap Position Holes

Small & mid sized vehicles

Full size vehicles

Large sized vehicles such

as motorhomes or dual

axel vehicles

Flap Retainer Bolt with

nylon Insert Hex Nut

Flap End Cap

Flap Clamp Bolts (5)

each side with washers

& Nylon Insert Hex Nuts

Mudflap

Trim Plate Bolts (8) each

side w/spacers, washers

and Nylon Insert Hex Nuts

IMPORTANT

The lowest point of the mud flaps need to

be a minimum of 100mm off the ground

when hitched or fully loaded. Ensure the

mudflaps are installed with a slight curve at

the top so there is tension on the rubber,

this will help provide maximum protection

from rocks and debris etc. (See page 7)