diybook KG Garden Gate Closer GTS 170 설치 지침 - 페이지 4
{카테고리_이름} diybook KG Garden Gate Closer GTS 170에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. diybook KG Garden Gate Closer GTS 170 7 페이지. Garden door-closer
diybook KG Garden Gate Closer GTS 170에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (7 페이지), 마운팅 (9 페이지)
페이지 인쇄
gardengatecloser.com
a diybook KG brand
Note: As long as the distances are correct the gate closer can be mounted in any of the two mounting holes. When using
a larger bracket (80 or 100 mm), it is of advantage to choose one of the middle holes so that the gate closer can be fine-
tuned afterwards.
Step 3: Mount bracket 1
After having measured the correct position of bracket 1 on the gatepost, mark the drilling holes with a pen. We
recommend to centre-punch the drilling holes in order to prevent the metal drill from slipping off.
Drill the holes using a cordless screwdriver with a 4.2 mm drill. The drill's dimensions are essential here because if using
a smaller diameter, the screw can tear off. Using a bigger diameter, the screw doesn´t find enough hold.
After drilling, mount the bracket and tighten it using the tapping screws.
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 4