diybook KG Garden Gate Closer GTS 170 설치 지침 - 페이지 6
{카테고리_이름} diybook KG Garden Gate Closer GTS 170에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. diybook KG Garden Gate Closer GTS 170 7 페이지. Garden door-closer
diybook KG Garden Gate Closer GTS 170에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (7 페이지), 마운팅 (9 페이지)
페이지 인쇄
gardengatecloser.com
a diybook KG brand
Having measured the distance correctly, mark, centre-punch and then drill both holes for bracket 2 using a 4.2 mm drill.
Mount and tighten bracket 2 using the tapping screws enclosed.
Step 5: Insert and tighten the garden gate closer
For easier mounting, the garden gate closer is pre-loaded when delivered. For inserting the gate closer, open the gate
until the gate closer can be put into the respective holes without applying any force. The thicker end of the closer is to
be put into bracket 1 (near the wall). The slimmer end is being inserted into bracket 2 (on the gate).
Finally, the garden gate closer is fixed using the cap nuts. Therefore, screw on and tighten the cap nuts using the
locknuts. In this step the nuts should be tightened in such a fashion, so that the threaded rods are straightened and
stand in right angles to the mounting bracket.
Note: In most cases, the pre-loading security bolt loosens by itself during this procedure. In case that the bolt remains,
carefully move the gate just a few millimetres towards its opening direction!
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 6