ClearView HD168Bi 사용자 설명서 - 페이지 8

{카테고리_이름} ClearView HD168Bi에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView HD168Bi 10 페이지. Quad cvbs/hdmi hd encoder modulator
ClearView HD168Bi에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지)

페이지 인쇄
ClearView HD168Bi 사용자 설명서

3.2.3 Step 2: Adjust System Settings

Click on
SETUP
then on
System
You can reset the unit to Factory Default or just Hardware Reset by clicking on this dropdown here.
Be sure to always press the Save Settings to the left after selecting your option. The IP Address of
the unit can be adjusted in the 192.168 range. The last 2 sections are adjustable here. MAC address
and Password can be changed and after each change press the Save Settings button to the left.
The output resolution of each channel can be set here.
After all settings have been adjusted press the-
Store Settings and Reboot System for them to be saved completely.
If the buttons turn grey while you are adjusting settings log out then back in again
To activate them.
The
STATUS
but only shows you status of the device and changes cannot be made in this menu.
HD168Bi Manual Rev 1.0