ClearView HD168Bi Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Modulador ClearView HD168Bi. ClearView HD168Bi 10 páginas. Quad cvbs/hdmi hd encoder modulator
Também para ClearView HD168Bi: Manual do utilizador (9 páginas)

Imprimir página
ClearView HD168Bi Manual do utilizador

3.2.3 Step 2: Adjust System Settings

Click on
SETUP
then on
System
You can reset the unit to Factory Default or just Hardware Reset by clicking on this dropdown here.
Be sure to always press the Save Settings to the left after selecting your option. The IP Address of
the unit can be adjusted in the 192.168 range. The last 2 sections are adjustable here. MAC address
and Password can be changed and after each change press the Save Settings button to the left.
The output resolution of each channel can be set here.
After all settings have been adjusted press the-
Store Settings and Reboot System for them to be saved completely.
If the buttons turn grey while you are adjusting settings log out then back in again
To activate them.
The
STATUS
but only shows you status of the device and changes cannot be made in this menu.
HD168Bi Manual Rev 1.0