diybook KG Garden Gate Closer GTS 170 마운팅 - 페이지 6
{카테고리_이름} diybook KG Garden Gate Closer GTS 170에 대한 마운팅을 온라인으로 검색하거나 PDF를 다운로드하세요. diybook KG Garden Gate Closer GTS 170 9 페이지. Garden door-closer
diybook KG Garden Gate Closer GTS 170에 대해서도 마찬가지입니다: 설치 지침 (7 페이지), 조립 지침 매뉴얼 (7 페이지)
페이지 인쇄
gardengatecloser.com
a diybook KG brand
Step 5: Position and mount bracket 2 on the gate
Having positioned and fixed the first bracket (bracket 1) correctly, you´ve already done the biggest part of the mounting!
Now, the second bracket (bracket 2) must be positioned correctly on the gate. Therefore, the distance between the two
mounting holes (that is the chosen mounting hole on bracket 1 and the mounting hole on bracket 2) must be between
540 mm and 545 mm. Exact measurement is essential here!
But be careful: If this distance is too small, the gate will only open a little less than 90°. If it is too big, the gate won´t
close entirely.
Having measured the distance correctly, check the vertical position of the closer using the spirit level. It is
important that the brackets are placed levelled as well.
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 6