diybook KG Garden Gate Closer GTS 170 Montaj - Sayfa 6
Kontrolör diybook KG Garden Gate Closer GTS 170 için çevrimiçi göz atın veya pdf Montaj indirin. diybook KG Garden Gate Closer GTS 170 9 sayfaları. Garden door-closer
Ayrıca diybook KG Garden Gate Closer GTS 170 için: Montaj Talimatları (7 sayfalar), Montaj Talimatları Kılavuzu (7 sayfalar)
Sayfayı Yazdır
gardengatecloser.com
a diybook KG brand
Step 5: Position and mount bracket 2 on the gate
Having positioned and fixed the first bracket (bracket 1) correctly, you´ve already done the biggest part of the mounting!
Now, the second bracket (bracket 2) must be positioned correctly on the gate. Therefore, the distance between the two
mounting holes (that is the chosen mounting hole on bracket 1 and the mounting hole on bracket 2) must be between
540 mm and 545 mm. Exact measurement is essential here!
But be careful: If this distance is too small, the gate will only open a little less than 90°. If it is too big, the gate won´t
close entirely.
Having measured the distance correctly, check the vertical position of the closer using the spirit level. It is
important that the brackets are placed levelled as well.
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 6