ClearWater Lights Glenda LED Light Kit Dimmable 설치 매뉴얼 - 페이지 8

{카테고리_이름} ClearWater Lights Glenda LED Light Kit Dimmable에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights Glenda LED Light Kit Dimmable 12 페이지. For bmw k1600gt

페이지 인쇄

Step 4: Mounting The Volume Control Knob

Mounting The Volume Control Knob: (Bar Mount)

• Mount the Volume Control Knob to handlebar by using supplied

bracket and bolt to the existing controls.

• Route wires from lights and volume control knob bracket to area

under left side of forks. Connections can be made here and be kept

weatherproof.

• Hint for High Vibration installations: To keep the Volume Control Knob from

rotating itself under high vibration, put a dab of silicone adhesive under the knob

and let it dry. Then push the rubber knob back on. The friction of the glue under

the knob will keep it in place.

Step 5: Wiring

Wire Routing:

• Be sure to route wires so that they cannot become tangled or caught

in either a suspension part or steering part. Check movement of both

steering and suspension before riding the bike.

• It is sometimes helpful to follow existing wire routing.

Wiring:

• Main power needs to be connected to a switched hot. This means one

that turns off with the key. An Auxiliary hot can be used as an alternative.

Using the supplied Posi-twist connectors, connect the wires according

to the accompanying color wire diagram. Attach ground lug to ground

on frame tab or other suitable location. Be sure not use a Low beam

headlight wire on H4 headlight bikes or else the lights will shut off when

Page 8