ClearWater Lights Glenda LED Light Kit Dimmable Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для мотоциклів ClearWater Lights Glenda LED Light Kit Dimmable. ClearWater Lights Glenda LED Light Kit Dimmable 12 сторінок. For bmw k1600gt
Друкувати сторінкуStep 4: Mounting The Volume Control Knob
Mounting The Volume Control Knob: (Bar Mount)
• Mount the Volume Control Knob to handlebar by using supplied
bracket and bolt to the existing controls.
• Route wires from lights and volume control knob bracket to area
under left side of forks. Connections can be made here and be kept
weatherproof.
• Hint for High Vibration installations: To keep the Volume Control Knob from
rotating itself under high vibration, put a dab of silicone adhesive under the knob
and let it dry. Then push the rubber knob back on. The friction of the glue under
the knob will keep it in place.
Step 5: Wiring
Wire Routing:
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding the bike.
• It is sometimes helpful to follow existing wire routing.
Wiring:
• Main power needs to be connected to a switched hot. This means one
that turns off with the key. An Auxiliary hot can be used as an alternative.
Using the supplied Posi-twist connectors, connect the wires according
to the accompanying color wire diagram. Attach ground lug to ground
on frame tab or other suitable location. Be sure not use a Low beam
headlight wire on H4 headlight bikes or else the lights will shut off when
Page 8