3HS RMS-V II 설치 핸드북 - 페이지 9

{카테고리_이름} 3HS RMS-V II에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. 3HS RMS-V II 13 페이지. Ceiling mounted visual smoke detector

Installationshandbuch RMS-D II und RMS-V II

Mounting RMS-V II

The smoke detector must be mounted on a stable structure. Dust and other impurities

must be removed from the ceiling before the smoke detector can be replaced.

Drill a round hole with a 75mm diameter and at least 100mm deep in the ceiling. Please

note that the in-wall socket can only be fastened in a hole with a 75mm diameter.

Connect the wire with the smoke detector in accordance with the installation plan in

Fig. 2.

In order to avoid perturbations, the RMS-V ll should be grounded.

Screw the stainless steel plate on the ceiling with the safety screws, which prevent

unauthorized opening of the smoke detector.

Remove the protective foil from the front of the smoke detector before turning on the

voltage supply.

Installationshandbuch: RMS-D II und RMS-V II Relais

®3HStrading GmbH&Co.KG, Königsheimer Strasse 13,

D-78603 Renquishausen, Tel. 07429 33 61 Fax. 07429 91 61 335,

www.3HS.de

Seite 9 von 13

Stand: 01.12.2015

Version:2.7