3HS RMS-V II Installatie Handboek - Pagina 9
Blader online of download pdf Installatie Handboek voor {categorie_naam} 3HS RMS-V II. 3HS RMS-V II 13 pagina's. Ceiling mounted visual smoke detector
Pagina afdrukkenInstallationshandbuch RMS-D II und RMS-V II
Mounting RMS-V II
The smoke detector must be mounted on a stable structure. Dust and other impurities
-
must be removed from the ceiling before the smoke detector can be replaced.
Drill a round hole with a 75mm diameter and at least 100mm deep in the ceiling. Please
-
note that the in-wall socket can only be fastened in a hole with a 75mm diameter.
Connect the wire with the smoke detector in accordance with the installation plan in
-
Fig. 2.
In order to avoid perturbations, the RMS-V ll should be grounded.
-
-
Screw the stainless steel plate on the ceiling with the safety screws, which prevent
unauthorized opening of the smoke detector.
-
Remove the protective foil from the front of the smoke detector before turning on the
voltage supply.
Installationshandbuch: RMS-D II und RMS-V II Relais
®3HStrading GmbH&Co.KG, Königsheimer Strasse 13,
D-78603 Renquishausen, Tel. 07429 33 61 Fax. 07429 91 61 335,
www.3HS.de
Seite 9 von 13
Stand: 01.12.2015
Version:2.7