ClearWater Lights Glenda 설치 매뉴얼 - 페이지 8

{카테고리_이름} ClearWater Lights Glenda에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearWater Lights Glenda 12 페이지. Led light kit for bmw k1600gt
ClearWater Lights Glenda에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄

Step 4: Wiring

Electrical Connections:

• Connect to power, refer to image below & diagram on next page.

(A) Connect the fuse holder to the low beam (yellow / green stripe wire)

using either a Posi-tap or male quick connector.

(B) Connect the ground (black wires) to black wire B using a posi-tap or a

male quick connector.

• Use a Posi-twist to connect the green wire from the volume control

knob to the two green wires from the lights (3 wires).

• Use a Posi-twist to connect red (or orange) wire from the fuse holder

to the red wires from lights and volume control knob (4 wires)

• Use a Posi-twist to connect ground/black wire to black wires from

lights and volume control knob. (4 wires)

posi-tap to connect the white wire from the volume control knob to the

High Beam headlight hot lead (green wire C). This will be on only when

the high beam is illuminated.

(B) Ground

Black

(A) Switched Power

Yellow / Green Stripe

Page 8

Green