ClearWater Lights Glenda Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Equipamento de iluminação ClearWater Lights Glenda. ClearWater Lights Glenda 12 páginas. Led light kit for bmw k1600gt
Também para ClearWater Lights Glenda: Manual de instalação (12 páginas), Manual de instalação (12 páginas), Manual de instalação (12 páginas), Manual de instalação (16 páginas)

Step 4: Wiring

Electrical Connections:

• Connect to power, refer to image below & diagram on next page.
(A) Connect the fuse holder to the low beam (yellow / green stripe wire)
using either a Posi-tap or male quick connector.
(B) Connect the ground (black wires) to black wire B using a posi-tap or a
male quick connector.
• Use a Posi-twist to connect the green wire from the volume control
knob to the two green wires from the lights (3 wires).
• Use a Posi-twist to connect red (or orange) wire from the fuse holder
to the red wires from lights and volume control knob (4 wires)
• Use a Posi-twist to connect ground/black wire to black wires from
lights and volume control knob. (4 wires)
(C) If you would like to use the high beam feature (recommended), use a
posi-tap to connect the white wire from the volume control knob to the
High Beam headlight hot lead (green wire C). This will be on only when
the high beam is illuminated.
(B) Ground
Black
(A) Switched Power
Yellow / Green Stripe
Page 8
(C) High Beam Feature
Green