DJ'SLIGHTING DJS-LED631 사용자 설명서 - 페이지 6

{카테고리_이름} DJ'SLIGHTING DJS-LED631에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DJ'SLIGHTING DJS-LED631 11 페이지. 36x10w zoom moving head

5. DMX-512 control connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller

and the other side to the male 3-pin XLR input of the moving head. You can chain

multiple

Moving head together through serial linking. The cable needed should be two core,

screened cable with XLR input and output connectors. Please refer to the diagram

below.

Address 26

Address13

Address 1

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an

electrically noisy environment, such as in a discotheque, it is recommended to use

a DMX terminator. This helps in preventing corruption of the digital control signal by

electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor

connected between pins 2 and 3,which is then plugged into the output XLR socket

of the last fixture in the chain. Please see illustrations below.

120Ω

PIN 3

PIN 2

-5-

http://www.djslighting.com/