DJ'SLIGHTING DJS-LED631 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Luminária DJ'SLIGHTING DJS-LED631. DJ'SLIGHTING DJS-LED631 11 páginas. 36x10w zoom moving head

Imprimir página

5. DMX-512 control connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller

and the other side to the male 3-pin XLR input of the moving head. You can chain

multiple

Moving head together through serial linking. The cable needed should be two core,

screened cable with XLR input and output connectors. Please refer to the diagram

below.

Address 26

Address13

Address 1

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an

electrically noisy environment, such as in a discotheque, it is recommended to use

a DMX terminator. This helps in preventing corruption of the digital control signal by

electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor

connected between pins 2 and 3,which is then plugged into the output XLR socket

of the last fixture in the chain. Please see illustrations below.

120Ω

PIN 3

PIN 2

-5-

http://www.djslighting.com/