ARTFOX Lighting Sky Beam 14RX 사용자 설명서 - 페이지 5
{카테고리_이름} ARTFOX Lighting Sky Beam 14RX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTFOX Lighting Sky Beam 14RX 16 페이지. 295w lamp,15 prisms effects, rainbow
페이지 인쇄
• Tilt: 270 degrees (plus 16-bit fine tilt)
Connections:
• DMX Connections: 3-pin or 5-pin DMX In/Out (Data link max: 32 fixtures)
• Power Connections: Powercon In & Out
Electrical:
• Multi-voltage operation: 100-240V, 50/60Hz
• Max power consumption: 360W (@120V),
Dimensions & Weight:
• Dimension: 13.8" (L) x 13.5" (W) x 22.25" (H) / 350 x 343.5 x 565mm
• Weight: 34.1lbs. / 15.5kg.
What's Included:
• Folding Clamps
• Power cable & Date Cables
1.5 Cable connection（DMX）
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG,
low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. The end
connections must be made using XLR type 3 or 5-pin male/female connectors. A terminating plug must be inserted into the
last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT:
The wires must not make contact with each other or with the metal casing of the connectors. The casing
itself
must
be
connected
to
the
shield
braid
and
to
pin
1
of
the
connectors.
Figure 1 DMX Cable connection
1.6 Rigging (Optional)
This equipment can be positioned and fixed by clamp in every direction of the stage. Locking system makes it easy to fasten to
the bracket.
5