ARTFOX Lighting Sky Beam 14RX 사용자 설명서 - 페이지 6
{카테고리_이름} ARTFOX Lighting Sky Beam 14RX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTFOX Lighting Sky Beam 14RX 16 페이지. 295w lamp,15 prisms effects, rainbow
페이지 인쇄
Attention! Two clamps are needed to fix the equipment. Every clamp is locked by fastener of 1/4 kind. Fastener can only be
locked clockwise.
Attention! Fasten a safety string to the additional hole of side aluminum piece. The secondary accessory could not hang on the
delivery handle. Nip the equipment on bracket.
Check if rigging clamp (not including the one inside) damaged or not? If stand ten times weight as
the equipment. Make sure the architecture can stand ten times weight as all the equipment, clamps,
wirings and other additional fixtures.
Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to clamp
bracket, and then screw the nuts.
Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the two
levers by 1/4 rotating clockwise; then install another clamp.
Install on safety string which stands at least ten times weight as equipment. Terminal of the
accessory is designed for clamps.
Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to
flammable material or lighting source.
Figure 2 Installation
6