dji E1200 Standart 사용자 설명서 - 페이지 3

{카테고리_이름} dji E1200 Standart에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji E1200 Standart 9 페이지.

페이지 인쇄

About

The E1200 Standard Tuned Propulsion System is a multirotor propulsion system

that is designed for multi-rotor aircraft with payload limits of 7~15 kg. The E1200

Standard is more efficient and secure, and has better endurance. The Z-Blade

17-inch foldable propellers are made from an advanced carbon-fiber-reinforced

polymer, which reduces rotational inertia and enhances rigidity. New, upgraded

4216 motors promote efficient heat dissipation which improves endurance and

reliability, even when flying in harsh environments. The 640S Smart ESCs feature

a sinusoidal drive, which is more efficient and allows for greater agility. Highly

visible LED indicators show real-time motor status information, making flying even

safer. Furthermore, the ESC firmware can be upgraded by users, effectively future

proofing the E1200.

1. In the Box

(Clockwise rotation) ×1

1760 Foldable Propeller

(Clockwise) ×1

JST 3-Pin Cable ×2

2. Gain Value Setting

The new E1200 Standard ESC features a sinusoidal drive, which replaces the

traditional square wave drive to offer improved performance when accelerating

and decelerating. To achieve the same sensitivity as older ESCs, which use a

traditional square wave drive, reduce the gain values according to your flight

control system and frame. The table below shows typical gain values when using

the E1200 Standard with a DJI A2 flight control system and a frame which has a

diagonal wheelbase of 920 mm and a takeoff weight of 8 kg:

Pitch

90%

4216 Motor

640S ESC ×2

Basic

Roll

90%

(Counter-clockwise rotation) ×1

1760 Foldable Propeller

(Counter-clockwise) ×1

Outer ESC LED Indicator ×2

Accessory Package

Screws for foldable propellers

(M3×12.5 hexagon)

Screws for propeller mount cover (M3×8)

Propeller Washers

Yaw

Pitch

80%

130%

4216 Motor

Attitude

Roll

Vertical

130%

100%