dji Matrice 600 Pro 빠른 참조 매뉴얼 - 페이지 8

{카테고리_이름} dji Matrice 600 Pro에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Matrice 600 Pro 9 페이지.
dji Matrice 600 Pro에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (16 페이지)

페이지 인쇄

1. Fold in propeller blades and replace prop covers

a. Ensure zipper is on the bottom side of propeller arms as to not damage propellers

2. Unplug and remove PPK

a. Put back into case

b. Remove MicroSD Card and check contents

Open log file and note number of events

Replace MicroSD Card into PPK

3. Remove Sony A6000 SD Card and check contents

a. Note quality and number of images

IF POOR QUALITY RE-FLY WITH ADJUSTED CAMERA SETTINGS

Number of images must match number of trigger events in PPK Log

If good, place SD Card into protective case (NOT BACK IN CAMERA) and

place into top foam layer

4. Replace lens cap on Sony A6000

5. Remove XT2, replace gimbal cap, and return to case

6. Remove landing gear and disassemble (PLACE IN SAFE LOCATION, e.g. NOT ON

GROUND WHERE IT COULD BE STEPPED ON OR TRIPPED OVER)

7. Unlock and fold rotor arms down

8. Return platform to case (with A6000 facing rear)

9. Replace top foam layer

10. Replace disassembled landing gear

11. Fold down GPS antennae

12. Return all SD Cards, cables, controllers, iPad, and other gear to case

13.

Ensure GPS antennae are folded down

14. Close lid and latches

FINAL RETURN PACKING LIST

- DO NOT LEAVE THE FIELD WITHOUT THE FOLLOWING:

• Completed Metadata Sheet and field notepad

• Battery Case (Charger and Generator if needed)

• M600 Case

• PPK Case

• XT2 Case

• Landing Pad

• Computer with SD Card Reader

• High-Visibility Vest(s)

• Chairs and Tent if needed

• Water, sunblock, sunglasses, and bug spray

LEAVE NO TRACE -

BACK IN LAB