dji Matrice 600 Pro Manual de referência rápida - Página 8
Procurar online ou descarregar pdf Manual de referência rápida para Drones dji Matrice 600 Pro. dji Matrice 600 Pro 9 páginas.
Também para dji Matrice 600 Pro: Manual de início rápido (8 páginas), Manual do utilizador (16 páginas)
Imprimir página
1. Fold in propeller blades and replace prop covers
a. Ensure zipper is on the bottom side of propeller arms as to not damage propellers
2. Unplug and remove PPK
a. Put back into case
b. Remove MicroSD Card and check contents
-
Open log file and note number of events
-
Replace MicroSD Card into PPK
3. Remove Sony A6000 SD Card and check contents
a. Note quality and number of images
-
IF POOR QUALITY RE-FLY WITH ADJUSTED CAMERA SETTINGS
-
Number of images must match number of trigger events in PPK Log
-
If good, place SD Card into protective case (NOT BACK IN CAMERA) and
place into top foam layer
4. Replace lens cap on Sony A6000
5. Remove XT2, replace gimbal cap, and return to case
6. Remove landing gear and disassemble (PLACE IN SAFE LOCATION, e.g. NOT ON
GROUND WHERE IT COULD BE STEPPED ON OR TRIPPED OVER)
7. Unlock and fold rotor arms down
8. Return platform to case (with A6000 facing rear)
9. Replace top foam layer
10. Replace disassembled landing gear
11. Fold down GPS antennae
12. Return all SD Cards, cables, controllers, iPad, and other gear to case
13.
Ensure GPS antennae are folded down
14. Close lid and latches
FINAL RETURN PACKING LIST
- DO NOT LEAVE THE FIELD WITHOUT THE FOLLOWING:
• Completed Metadata Sheet and field notepad
• Battery Case (Charger and Generator if needed)
• M600 Case
• PPK Case
• XT2 Case
• Landing Pad
• Computer with SD Card Reader
• High-Visibility Vest(s)
• Chairs and Tent if needed
• Water, sunblock, sunglasses, and bug spray
-
LEAVE NO TRACE -
BACK IN LAB