Arthur Grillo DPC200 설치 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} Arthur Grillo DPC200에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arthur Grillo DPC200 16 페이지. Differential pressure controller, low pressure sensor with pi-control-mode
Arthur Grillo DPC200에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지), 설치 및 운영 매뉴얼 (14 페이지)

페이지 인쇄

OPERATION

5.3 Measuring mode

Display

ΔP Measurement

200 Pa

unit metric

operating mode

control mode

parameter

diff. pressure

limit switch

150 Pa

back and confirm

fan k-factor

k = 70

limit switch

300 m³/h

back and confirm

Start menu: Press button T1 approx. two seconds

Press button T2 to get to the next menu item

Press button T1 to switch between:

metric <=> imperial

Press button T2 to get to the next menu item

Press button T1 to switch between:

measuring mode <=> control mode

Press button T2 to get to the next menu item

Press button T1 to switch between:

diff. pressure <=> volume flow

Press button T2 to get to the next menu item

If selected parameter = diff. pressure

Button T1: reset value

Button T2: set value

Button T1: confirm value, display flashes once

Press button T2 to get to the next menu item

Press button T1 to leave the menu

Press button T2 to stay in the menu

If selected parameter = volume flow

than follows the additional input for the k-factor

Button T1: reset value

Button T2: set value

Button T1: confirm value, display flashes once

Press button T2 to get to the next menu item

Button T1: reset value

Button T2: set value

Button T1: confirm value, display flashes once

Press button T2 to get to the next menu item

Press button T1 to leave the menu

Press button T2 to stay in the menu

Doc.-no.: DPC200_01_EN

Action

Issue: 11/2015