Arthur Grillo DPC200 Installation And Operation Manual - Page 10
Browse online or download pdf Installation And Operation Manual for Controller Arthur Grillo DPC200. Arthur Grillo DPC200 16 pages. Differential pressure controller, low pressure sensor with pi-control-mode
Also for Arthur Grillo DPC200: Manual (7 pages), Installation And Operation Manual (14 pages)
Print Page
OPERATION
5.3 Measuring mode
Display
ΔP Measurement
200 Pa
menu
unit metric
operating mode
control mode
parameter
diff. pressure
limit switch
150 Pa
back and confirm
fan k-factor
k = 70
limit switch
300 m³/h
back and confirm
10
Start menu: Press button T1 approx. two seconds
Press button T2 to get to the next menu item
Press button T1 to switch between:
metric <=> imperial
Press button T2 to get to the next menu item
Press button T1 to switch between:
measuring mode <=> control mode
Press button T2 to get to the next menu item
Press button T1 to switch between:
diff. pressure <=> volume flow
Press button T2 to get to the next menu item
If selected parameter = diff. pressure
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
Press button T1 to leave the menu
Press button T2 to stay in the menu
If selected parameter = volume flow
than follows the additional input for the k-factor
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
Button T1: reset value
Button T2: set value
Button T1: confirm value, display flashes once
Press button T2 to get to the next menu item
Press button T1 to leave the menu
Press button T2 to stay in the menu
Doc.-no.: DPC200_01_EN
Action
Issue: 11/2015