Arthur Grillo DPC200-R 설치 및 운영 매뉴얼 - 페이지 5
{카테고리_이름} Arthur Grillo DPC200-R에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arthur Grillo DPC200-R 16 페이지. Airflow / pressure controller
페이지 인쇄
2.
Product description
The airflow / pressure controller DPC200-R measures low pressure of inert gases, par-
ticularly of air.
2.1 Type plate
1.
Product name
2.
Measuring range
3.
Supply voltage
4.
Signal output
5.
Serial no.
6.
Manufacturer
2.2 Intended use
This device is primarily intended for use with air conditioning systems, room pressure
control or filter control with ebm-papst continuously variable speed fans. It can be oper-
ated solely as a sensor (measuring mode) or closed loop controller for pressure / volu-
metric flow rate control. As analog output the operator can use a signal from 0 ...10 V DC.
Depending on the settings the signal has different meanings:
If the device is used as a pressure sensor, the output signal is proportional to the
1.
measured pressure.
As a volume flow sensor the device outputs a square root signal.
2.
With closed loop pressure or volume flow the output signal stands for the con-
3.
trol variable of the PI-control.
2.3 Functional description
A soft silicone diaphragm is used as sensor. Under the influence of the differential pressure
the diaphragm displaces a measuring spring until the spring force compensates for the
pressure pushing on the diaphragm. A contactless differential transformer and suitable
electronics convert this displacement into a continuously variable output voltage signal.
The DPC200-R provides two function options:
1.
On the one hand it is used as a measuring device. In the measuring mode the differential
pressure is shown on the display, and a proportional 0...10V DC output signal is provided.
2.
Besides the measuring mode the DPC200-R also can be operated in a control mode.
Two setpoints can be adjusted in the device and can be selected with the potential
free contact input. The PI-Algorithm matches the measured differential pressure with
the setpoint and operates the control variable so that a constant pressure results. The
control variable is given as a 0...10 V DC output signal.
Instead of the quantity 'differential pressure' also the quantity 'volume flow' can be used
for measuring and for control.
Doc.-no.: DPC200-R_02_EN
1.
2.
3.
4.
5.
6.
Issue: 06/2018
PRODUCT DESCRIPTION
5