ARTHUR HOLM AH15D X2HDGA 사용자 설명서 - 페이지 8

{카테고리_이름} ARTHUR HOLM AH15D X2HDGA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM AH15D X2HDGA 14 페이지. Hdcp compliant retractable monitors for furniture integration

페이지 인쇄

OSD MENU

Setup

Language: OSD language selection

Restore Factory Default: Adjusts the parameters to the initial factory

parameters

Blending: OSD window transparency

∙ Low

∙ Medium

∙ High

∙ Off

OSD Duration: Adjusts the time that the OSD menu window remains on

screen

Software Update: Used for firmware upgrade mirror

Mirror:

0. Image with no flip

1. Vertical flip

2. Horizontal flip

3. Rotate

INPUT CONNECTORS

DVI 1/ DVI A DVI-I input signal:

Connect a DVI (digital) input signal and

select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to

connect an ARGB (analogue) input signal and select DVI-A on the OSD

monitor menu.

DVI 2 input signal:

Connect a DVI (digital) input signal and select DVI 2 on

the OSD monitor menu.

- Use high quality DVI cables with 2m maximum length.

12V D.C.:

Power supply input connector. XLR-4 connector.

- 1,2: Ground

- 3,4: 12Vdc

GPI:

Monitor external contact close control. SubD9 female.

1 . GPI1 +

2. GPI1 –

3. GPI2 +

4. GPI2 –

5. GPI3 –

6. GPI3 +

7. N.C.

8. +12Vdc (600mA max.)

9. Ground:

- Use GPI1 (1:12Vdc, 2:Ground) to open the monitor

- Use GPI3 (6:12Vdc, 5:Ground) to close the monitor

Termination:

Activate (ON) the termination, ONLY on the last unit of the

RS422 bus.

AHnet:

RJ45 CAT5 connector for addressable RS422 control. There is a loop

through connector to use as signal RS422 output. Up to 30 monitors can be

connected on the same RS422 bus.

Service:

Used for firmware upgrade.