ARTHUR HOLM AH15D X2HDGA 사용자 설명서 - 페이지 9

{카테고리_이름} ARTHUR HOLM AH15D X2HDGA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM AH15D X2HDGA 14 페이지. Hdcp compliant retractable monitors for furniture integration

페이지 인쇄

PACKING INSTRUCTIONS

ATTENTION !

Thank you for purchasing our product, we hope you are completely satisfied with it. If you have any

questions you can contact us by email [email protected] or by phone +34 938 502

376 office hours 9am - 2pm & 3pm - 6pm GMT +1.

WARNING: To protect the product when moving place on the supplied protective foam, with screen

facing up and strapped securely to a pallet.

Protective foam

UNPACKING

1- Remove the inside protective foam piece before using the device.

(It is recommended to keep the foam which can be placed inside

again if the monitor is moved).

2- Securely mount the monitor to the table using the two mounting

brackets (included).

Albiral Display Solutions, s.l.

c/Fátima 25, 08512 BCN - Spain

tel. +34 938 502 376 www.arthurholm.com /www.albiral.com

8 sec.

"beep"

Power

FOAM

PACKING

3- When transporting, raise the monitor housing up. Press and hold the

front button for 8 seconds until you hear a beep.

4- Hold the hatch before lowering the monitor housing then disconnect

the power to disable beep. Now the buttons are non-operational.

5- Place the supplied protective foam.

WARNING

Do not use the unit in horizontal position. It could damage the

mechanical parts of the monitor.

Do not use force to open or close the monitor. It could damage the

mechanical parts of the monitor.

Use this device only with the supplied accessories. The use of unapproved

accessories, as a power supply unit, will invalid the warranty.

Never open the monitor. Only authorized qualified personnel should

open the monitor.

Do not scratch or rub the TFT panel surface with any kind of abrasive

substances or materials.

Do not spill any liquid into the cabinet or use the monitor near

water. If any liquid is accidentally spilled on the surface, cut

the power supply and dry it with a cloth. Don't restore the

power supply until it's completely dry.

Do not insert objects of any kind into the cabinet slots, as they may

touch dangerous voltage points, which can be harmful or fatal or may

cause electric shock, fire or equipment failure.

If the monitor or glass is broken, do not come in contact with the liquid

crystal and handle with care.

Do not cover for prolonged periods of time. Excessive temperatures can

reduce service life.

Before cleaning, always remove the power supply. Do not use any

abrasive detergent, solvents, bleaching or chlorine agents.

Do not stick any labels on the TFT panel surface.

Do not apply too much pressure to the TFT panel surface.

Handle with care when transporting. Save packaging for transporting.