EDIFIER W360BT 사용 설명서 - 페이지 3

{카테고리_이름} EDIFIER W360BT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIFIER W360BT 10 페이지. Wearable bluetooth earbuds

■ How to wear

1. Put the cable downward, wear the neck hook from the back of neck;

2. Insert the eartips into the ears and adjust them to a comfortable position.

Section 3

■ Operation instructions

1. Charging

When the headphone is in use, if blue indicator change to red color, it shows the battery level is in low, and you need to

charge.

1.1 Connect the USB charging cable to USB pocket with standard power source.

1.2 Connect the other port of the USB charging cable to micro USB charging port on the headphone.

Red light is steady light means it is charging, red light off and blue light is steady light means it is fully charged.

It takes about 2 hours for fully charging

Fully charged

Tips: In order to avoid shorten the battery life, recommence to be fully charged the battery before the first time use;

please charge the battery at least once per 3 months when un-use the headphone for a long time.

Warning: the rechargeable battery on the headphone must be properly disposed for recycling use. Do not put the

battery into fire to avoid explosion.

2. Power ON/OFF

Function

operation

Slide the switch to ON position

OFF

Slide the switch to OFF position

Tips: the headphone is design with toggle switch, please note that it can't automatically be off when without any

connection after power on.

Section 4

3. Pairing

3.1. Follow the below operation to make the headphone enter pairing mode

Function

Operation

Enter pairing mode

Press and hold multi-function key

Battery is in low level

indicator

Blue light steady light for 1 seconds

Red light steady light for 2 seconds

for about 5 seconds Red/blue light flash alternatively

Indicator