EDIFIER W360BT Operating Instructions Manual - Page 3
Browse online or download pdf Operating Instructions Manual for Headphone EDIFIER W360BT. EDIFIER W360BT 10 pages. Wearable bluetooth earbuds
Print Page
■ How to wear
1. Put the cable downward, wear the neck hook from the back of neck;
2. Insert the eartips into the ears and adjust them to a comfortable position.
Section 3
■ Operation instructions
1. Charging
When the headphone is in use, if blue indicator change to red color, it shows the battery level is in low, and you need to
charge.
1.1 Connect the USB charging cable to USB pocket with standard power source.
1.2 Connect the other port of the USB charging cable to micro USB charging port on the headphone.
Red light is steady light means it is charging, red light off and blue light is steady light means it is fully charged.
It takes about 2 hours for fully charging
Fully charged
Tips: In order to avoid shorten the battery life, recommence to be fully charged the battery before the first time use;
please charge the battery at least once per 3 months when un-use the headphone for a long time.
Warning: the rechargeable battery on the headphone must be properly disposed for recycling use. Do not put the
battery into fire to avoid explosion.
2. Power ON/OFF
Function
operation
ON
Slide the switch to ON position
OFF
Slide the switch to OFF position
Tips: the headphone is design with toggle switch, please note that it can't automatically be off when without any
connection after power on.
Section 4
3. Pairing
3.1. Follow the below operation to make the headphone enter pairing mode
Function
Operation
Enter pairing mode
Press and hold multi-function key
Battery is in low level
indicator
Blue light steady light for 1 seconds
Red light steady light for 2 seconds
for about 5 seconds Red/blue light flash alternatively
2
Indicator