ARTHUR HOLM AH22D1HGA 사용자 설명서 - 페이지 4

{카테고리_이름} ARTHUR HOLM AH22D1HGA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM AH22D1HGA 14 페이지. Hdcp compliant motorised monitors for furniture integration

페이지 인쇄

1. Input Connectors

EC REGULATIONS AND SECURITY

ATTENTION: Do not disassemble or modify the device in any way.

This symbol warns of the presence of dangerous un-insulated

voltages inside some of the components, of sufficient magnitude

to expose people to risk of electronic shock.

This symbol draws attention to important use and maintenance

instructions in the manual that accompanies the unit.

This symbol indicates that the equipment conforms to the norms

established by the European Community.

This symbol indicates that the equipment has some potential

entrapment hazard parts.

SAFETY INSTRUCTIONS

Plugs

• Do not dismantle any part of the monitor power connector.

• Disconnect the power plug from the AC outlet when the monitor is not

going to be used for an indefinite period of time.

Power and extensions cords

• Use the appropriate power cord with the correct plug type.

• Do not overload wall outlets or power cords.

• Make sure the total ampere passed through a extension cord does not

exceed the maximum allowed by the cable used.

• Do not place anything on the power cord.

• Do not locate this product where a person may walk or trip over the

cord.

SAFETY INSTRUCTIONS

Wiring connected to hazardous voltage requires installation by

qualified personnel or the use of ready-made flexible cables.

For your security, your equipment must be connected to an

electrical outlet with grounding connection protection.

Since the plug is used to disconnect the device, the operating

electrical outlet must be in an easily accessible place.

Environment

• Install the equipment on an elevated, flat surface.

• Install the equipment in a ventilated area.

• Avoid exposing the equipment to:

∙

Rain or water

∙

Excessive heat, cold or humidity

∙

Area exposed to direct sunlight

∙

Dirty areas

∙

Equipment generating strong magnetic fields

• Avoid placing open containers of liquid, near the equipment.

• Keep a minimum distance of 30 mm in order to have good ventilation.

• Never place above the device any sources of flames such as lighted

candles, etc.

• If you are using the device in extreme weather conditions and/or

tropical climates, the equipment should be installed in a room which

ensures a reasonable level of temperature and humidity.

• To prevent damage the equipment must be firmly anchored to the

surface, as shown on the installation instructions.

• When the monitor is closed, the maximum static load is 15 Kg /33 lbs

(US).