ARTHUR HOLM AH22D1HGA Kullanıcı Kılavuzu - Sayfa 4
Monitör ARTHUR HOLM AH22D1HGA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ARTHUR HOLM AH22D1HGA 14 sayfaları. Hdcp compliant motorised monitors for furniture integration
Sayfayı YazdırEC REGULATIONS AND SECURITY
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated
voltages inside some of the components, of sufficient magnitude
to expose people to risk of electronic shock.
This symbol draws attention to important use and maintenance
instructions in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
This symbol indicates that the equipment has some potential
entrapment hazard parts.
SAFETY INSTRUCTIONS
Plugs
• Do not dismantle any part of the monitor power connector.
• Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indefinite period of time.
Power and extensions cords
• Use the appropriate power cord with the correct plug type.
• Do not overload wall outlets or power cords.
• Make sure the total ampere passed through a extension cord does not
exceed the maximum allowed by the cable used.
• Do not place anything on the power cord.
• Do not locate this product where a person may walk or trip over the
cord.
6
SAFETY INSTRUCTIONS
Wiring connected to hazardous voltage requires installation by
qualified personnel or the use of ready-made flexible cables.
For your security, your equipment must be connected to an
electrical outlet with grounding connection protection.
Since the plug is used to disconnect the device, the operating
electrical outlet must be in an easily accessible place.
Environment
• Install the equipment on an elevated, flat surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙
Rain or water
∙
Excessive heat, cold or humidity
∙
Area exposed to direct sunlight
∙
Dirty areas
∙
Equipment generating strong magnetic fields
• Avoid placing open containers of liquid, near the equipment.
• Keep a minimum distance of 30 mm in order to have good ventilation.
• Never place above the device any sources of flames such as lighted
candles, etc.
• If you are using the device in extreme weather conditions and/or
tropical climates, the equipment should be installed in a room which
ensures a reasonable level of temperature and humidity.
• To prevent damage the equipment must be firmly anchored to the
surface, as shown on the installation instructions.
• When the monitor is closed, the maximum static load is 15 Kg /33 lbs
(US).
7