EDIFIER W855BT 사용자 설명서 - 페이지 4

{카테고리_이름} EDIFIER W855BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EDIFIER W855BT 16 페이지. Multifunction hi-fi bluetooth headset

Remark: The headset will be standby mode if turned on but not connected

with devices.

2. Pairing the headset with Bluetooth devices

Functio

Enter

Keep the switch button

pairing

to Bluetooth logo

mode

about two seconds

Remark: Pairing mode will last 2 minutes. If no devices can be connected

after 2 minutes, it will return to standby mode automatically.

2) Pairing the headset with a Bluetooth cell phone via Bluetooth

Prior to using the headset for the first time, you have to pair it with a

Bluetooth-enabled cell phone. The pairing procedures are subject to

different models of cell phones. Please refer to your cell phone user's

manual for further information. The general pairing procedures are as

follows:

1) Keep your headset and phone within 1 meter when pairing;

2) Make the headset enter pairing mode (please refer to "How to enter

pairing mode);

3) Activate your cell phone's Bluetooth function and set your cell phone to

search for Bluetooth devices within range, and select "W855BT" from

the list of devices shown;

4) After successful connecting, blue LED of headset flashes twice every 4

seconds and emits " Connected"

Remarks:

If the cellphone tips enter pairing password please enter "0000"and



confirm

After pairing is successful, the headset and the cell phone will remember



each other, they will no need to re-pair next time. Every time the headset

is turned on, it will connect to last connected device automatically.

If the headset is not connected with any devices(turned on already),short



press any button(MFB button,volume up,volume down),the headset will

try to connected to last connected devices.

Operation

LED indicator

Red and blue

LED flash

alternately

Prompt tone

Pairing