EDIFIER W855BT Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} EDIFIER W855BT. EDIFIER W855BT 16 pagina's. Multifunction hi-fi bluetooth headset
Pagina afdrukken
Remark: The headset will be standby mode if turned on but not connected
with devices.
2. Pairing the headset with Bluetooth devices
1) How to enter pairing mode
Functio
ns
Enter
Keep the switch button
pairing
to Bluetooth logo
mode
about two seconds
Remark: Pairing mode will last 2 minutes. If no devices can be connected
after 2 minutes, it will return to standby mode automatically.
2) Pairing the headset with a Bluetooth cell phone via Bluetooth
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user's
manual for further information. The general pairing procedures are as
follows:
1) Keep your headset and phone within 1 meter when pairing;
2) Make the headset enter pairing mode (please refer to "How to enter
pairing mode);
3) Activate your cell phone's Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select "W855BT" from
the list of devices shown;
4) After successful connecting, blue LED of headset flashes twice every 4
seconds and emits " Connected"
Remarks:
If the cellphone tips enter pairing password please enter "0000"and
confirm
After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time. Every time the headset
is turned on, it will connect to last connected device automatically.
If the headset is not connected with any devices(turned on already),short
press any button(MFB button,volume up,volume down),the headset will
try to connected to last connected devices.
Operation
2
LED indicator
Red and blue
LED flash
alternately
Prompt tone
Pairing