dji INSPIRE 2 면책 조항 및 안전 매뉴얼 - 페이지 7

{카테고리_이름} dji INSPIRE 2에 대한 면책 조항 및 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji INSPIRE 2 20 페이지. Focus handwheelremote controller stand
dji INSPIRE 2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (14 페이지), 유지 관리 및 수리 매뉴얼 (6 페이지), 안전 매뉴얼 (4 페이지), 매뉴얼 (2 페이지), 사용자 설명서 (5 페이지), 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄

IMPORTANT NOTE: FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed

and operated with a minimum distance of 20 cm between the radiator

and your body. This transmitter must not be co-located or operate in

conjunction with any other antenna or transmitter.

FCC Class B Information

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular location. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help;

EU Compliance Statement

SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device

is in compliance with the essential requirements and other relevant

provisions of the R&TTE Directive.

A copy of the EU Declaration of Conformity is available online at

www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industrie Strasse. 12, 97618,

Niederlauer, Germany

Before You Begin

The following documents have been produced to help you safely

operate and make full use of your aircraft:

In the Box

Disclaimer and Safety Guidelines

Intelligent Flight Battery Safety Guidelines

Quick Start Guide

User Manual

Check all of the included parts listed in the In the Box document and

read the Disclaimer and Safety Guidelines before flight. Then prepare

for your first flight by using the Quick Start Guide and watching all

of the tutorial videos on DJI's official website (http://www.dji.com). If

you have questions, refer to the User Manual in the DJI GO 4 app or

on DJI's official website for more comprehensive information. Make

sure you fully understand the functionality of each individual part, the

flight condition requirements, the key contingency warning functions/

systems, and all government regulations before each flight. If you

have any questions or problems during the assembly, maintenance

or use of this product, please contact DJI or a DJI authorized dealer.

DJI reserves the right to update this Disclaimer and Safety Guidelines. Please visit

http://www.dji.com and check your email periodically for the latest version. This

disclaimer is made in various language versions; in the event of divergence among

different versions, the English version shall prevail.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property

damage, observe the following rules:

1. Use only genuine DJI parts or parts certified by DJI. Unauthorized

parts or parts from non-DJI certified manufacturers may cause

system malfunctions and compromise safety.

2. Ensure there are no foreign objects (such as water, oil, soil, sand,

etc.) inside of the aircraft or its components.

3. Ensure the aircraft and its components – including but not limited

to the remote controller, camera, gimbal, compass, propulsion

system, and battery – are all in good working order, damage-

free, and functioning well. Refer to the remaining sections in this

document for more details on how to ensure the functionality of

these components.

4. DO NOT modify or alter the aircraft, its components, and parts.

Unauthorized modification may cause malfunctions and affect the

aircraft's functionality and safety.

Remote Controller

1. Ensure the remote controller is fully charged before each flight.

2. If the remote controller is powered on and has NOT been used for

5 minutes, it will sound an alert. After 10 minutes it will automatically

power off. Move the sticks or perform some other action to cancel the

alert.

3. Adjust the clamp of the mobile device holder to allow a firm grip

on your mobile device.

4. Ensure the mobile device holder is firmly in place and does not slip.

5. Ensure the antennas of the remote controller are unfolded and

adjusted to the proper position to achieve optimal transmission quality.

6. Repair or replace the remote controller if damaged. A damaged

remote controller antenna will greatly decrease performance.

7. Linking is required if you wish to replace your remote controller or

receiver or add a new remote controller. Refer to the User Manual

for details.

8. A secondary remote controller cannot be linked with the aircraft and

cannot control the aircraft's flight. You may configure it into a primary

remote controller via the DJI GO 4 app and then link it to the aircraft

to control flight.

9. Make Sure that you first switch off the aircraft (after it is safe to do so),

then switch off the Remote Controller. Otherwise it may cause the lost

of control of the aircraft.

Compass

To avoid possible serious injury and property damage, observe the

following rule:

Land immediately when severe drifting occurs in flight, i.e., the aircraft

does NOT fly in straight lines.

Only calibrate the compass when the DJI GO 4 app or the status

indicator prompt you to do so. Observe the following rules when

calibrating your compass:

1. DO NOT calibrate your compass where there is a chance of strong

magnetic interference, such as magnetite, parking structures, and

steel reinforcements underground.

2. DO NOT carry ferromagnetic materials with you during calibration

such as cellular phones.

3. The DJI GO 4 app will prompt you to resolve the compass issue

if the compass is affected by strong interference after calibration

is complete. Follow the prompted instructions to resolve the

compass issue.