dji INSPIRE 2 Exoneração de responsabilidade e manuais de segurança - Página 7
Procurar online ou descarregar pdf Exoneração de responsabilidade e manuais de segurança para Quadricópteros dji INSPIRE 2. dji INSPIRE 2 20 páginas. Focus handwheelremote controller stand
Também para dji INSPIRE 2: Manual de início rápido (18 páginas), Manual do utilizador (14 páginas), Manual de manutenção e reparação (6 páginas), Manuais de segurança (4 páginas), Manual (2 páginas), Manual do utilizador (5 páginas), Manual de início rápido (9 páginas)
Imprimir página
IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator
and your body. This transmitter must not be co-located or operate in
conjunction with any other antenna or transmitter.
FCC Class B Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular location. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected;
Consult the dealer or an experienced radio/TV technician for help;
EU Compliance Statement
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device
is in compliance with the essential requirements and other relevant
provisions of the R&TTE Directive.
A copy of the EU Declaration of Conformity is available online at
www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618,
Niederlauer, Germany
Before You Begin
The following documents have been produced to help you safely
operate and make full use of your aircraft:
In the Box
Disclaimer and Safety Guidelines
Intelligent Flight Battery Safety Guidelines
Quick Start Guide
User Manual
Check all of the included parts listed in the In the Box document and
read the Disclaimer and Safety Guidelines before flight. Then prepare
for your first flight by using the Quick Start Guide and watching all
of the tutorial videos on DJI's official website (http://www.dji.com). If
you have questions, refer to the User Manual in the DJI GO 4 app or
on DJI's official website for more comprehensive information. Make
sure you fully understand the functionality of each individual part, the
flight condition requirements, the key contingency warning functions/
systems, and all government regulations before each flight. If you
have any questions or problems during the assembly, maintenance
or use of this product, please contact DJI or a DJI authorized dealer.
DJI reserves the right to update this Disclaimer and Safety Guidelines. Please visit
http://www.dji.com and check your email periodically for the latest version. This
disclaimer is made in various language versions; in the event of divergence among
different versions, the English version shall prevail.
Individual Parts
Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. Use only genuine DJI parts or parts certified by DJI. Unauthorized
parts or parts from non-DJI certified manufacturers may cause
system malfunctions and compromise safety.
2. Ensure there are no foreign objects (such as water, oil, soil, sand,
etc.) inside of the aircraft or its components.
3. Ensure the aircraft and its components – including but not limited
to the remote controller, camera, gimbal, compass, propulsion
system, and battery – are all in good working order, damage-
free, and functioning well. Refer to the remaining sections in this
document for more details on how to ensure the functionality of
these components.
4. DO NOT modify or alter the aircraft, its components, and parts.
Unauthorized modification may cause malfunctions and affect the
aircraft's functionality and safety.
Remote Controller
1. Ensure the remote controller is fully charged before each flight.
2. If the remote controller is powered on and has NOT been used for
5 minutes, it will sound an alert. After 10 minutes it will automatically
power off. Move the sticks or perform some other action to cancel the
alert.
3. Adjust the clamp of the mobile device holder to allow a firm grip
on your mobile device.
4. Ensure the mobile device holder is firmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and
adjusted to the proper position to achieve optimal transmission quality.
6. Repair or replace the remote controller if damaged. A damaged
remote controller antenna will greatly decrease performance.
7. Linking is required if you wish to replace your remote controller or
receiver or add a new remote controller. Refer to the User Manual
for details.
8. A secondary remote controller cannot be linked with the aircraft and
cannot control the aircraft's flight. You may configure it into a primary
remote controller via the DJI GO 4 app and then link it to the aircraft
to control flight.
9. Make Sure that you first switch off the aircraft (after it is safe to do so),
then switch off the Remote Controller. Otherwise it may cause the lost
of control of the aircraft.
Compass
To avoid possible serious injury and property damage, observe the
following rule:
Land immediately when severe drifting occurs in flight, i.e., the aircraft
does NOT fly in straight lines.
Only calibrate the compass when the DJI GO 4 app or the status
indicator prompt you to do so. Observe the following rules when
calibrating your compass:
1. DO NOT calibrate your compass where there is a chance of strong
magnetic interference, such as magnetite, parking structures, and
steel reinforcements underground.
2. DO NOT carry ferromagnetic materials with you during calibration
such as cellular phones.
3. The DJI GO 4 app will prompt you to resolve the compass issue
if the compass is affected by strong interference after calibration
is complete. Follow the prompted instructions to resolve the
compass issue.
©
2016 DJI All Rights Reserved.
5