ARTHUR HOLM AHDTL 사용자 설명서 - 페이지 11

{카테고리_이름} ARTHUR HOLM AHDTL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM AHDTL 20 페이지. Universal motorized system for gooseneck microphones
ARTHUR HOLM AHDTL에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

Controls & Connectors
Settings:
DIP SWITCH
1,2,3,
4,5
6
AHnet:
loop through connector to use as signal RS422 output. You can connect up
to 30 devices on the same RS422 bus.
AHnet ADDRESS:
device into the RS422 addressable bus
6 dip switch to configure the DynamicTalk.
FUNCTION
ON: DynamicTalk configured in PA mode.
The Talk push button controls the microphone mute
function
OFF: DynamicTalk configured in conference mode.
The talk push button has no function, the contact close
is available on GPO connector and the LED Ring is
controlled externally (GPI)
Only factory. Leave these dip switches off
Termination of the RS422 bus. Configure to ON only in
the last device of the RS422 bus
RJ45 CAT5 connector for addressable RS422 control. There is a
Using the AHnet protocol, this is the number of the
11