ARTHUR HOLM AHDTL Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pengangkatan ARTHUR HOLM AHDTL. ARTHUR HOLM AHDTL 20 halaman. Universal motorized system for gooseneck microphones
Juga untuk ARTHUR HOLM AHDTL: Panduan Pengguna (13 halaman)

Halaman Cetak

Controls & Connectors

Settings:

DIP SWITCH

1,2,3,

4,5

AHnet:

loop through connector to use as signal RS422 output. You can connect up

to 30 devices on the same RS422 bus.

AHnet ADDRESS:

device into the RS422 addressable bus

6 dip switch to configure the DynamicTalk.

FUNCTION

ON: DynamicTalk configured in PA mode.

The Talk push button controls the microphone mute

function

OFF: DynamicTalk configured in conference mode.

The talk push button has no function, the contact close

is available on GPO connector and the LED Ring is

controlled externally (GPI)

Only factory. Leave these dip switches off

Termination of the RS422 bus. Configure to ON only in

the last device of the RS422 bus

RJ45 CAT5 connector for addressable RS422 control. There is a

Using the AHnet protocol, this is the number of the