FITKIT FT098 사용자 설명서 - 페이지 11

{카테고리_이름} FITKIT FT098에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FITKIT FT098 14 페이지.

Translation of Error Codes

Error code

Bluetooth Function

Scan QR code below to download ONEFITPLUS APP

OneFitplus tracks your Health data by connecting to your health equipment and your fitness band and tracking all your health

data in once place. The OneFitplus app tracks Exercise (steps), Calories burnt and Sleep besides other health data. We connect

to most fitness bands so our customers do not need to invest on another product.

OneFitplus certified panel of Nutritionists will interact (speak) and build customized plans for each customer. Our certified

panel of Fitness Experts will build customized plans of each customer based on their equipment and age/health.

We keep all your data in one place- on the OneFitplus app so that it can be referenced by you, your Coach or medical

practitioners.

Description

Communication

Abnormal:

when the power is on, the

connection between lower

controller and the console is

abnormal.

No signal from motor.

Over current protection:

In working , the lower

controller detects the current

to be over 6A for more than

3 seconds.

Explosion-proof

impact

protection:

the

abnormal

voltage or motor cause the

faulty of circuit that drive the

motor.

No safety key

Possible Cause: the communication between the lower controller

and console is blocked, check each joints between the controller

and console, make sure that each core is fully plugged in. Check

the connection line, replace it if it's damaged.

Possible Cause:

Check the motor cable to see whether it is connected well or not,

if not, connect the motor wire again.

Check the motor cable to see whether it is damaged or has a burnt

smell, if yes, replace the motor.

Possible Cause:

Overloading leads to excessive current, and the system stops out of

self-protection, or some part is stuck, causing the motor to stop.

Adjust the treadmill and restart it. Check if there is liquid or burnt

smell while the motor is running, if yes, replace the motor; check if

the controller has a burnt smell, if yes, replace the controller; check

the power supply voltage, if it does not match the specifications,

change into correct voltage and test the machine again.

Possible Cause:

Check if the power supply voltage is 50% lower than normal

voltage ，use the correct voltage and test the machine again；check

if the controller has a burnt smell and replace the controller; Check

if the motor cable is connected and connect the motor wire again.

Put the safety key on the right place.

Solution