ARTHUR HOLM DB1Twin 설치 지침 - 페이지 10

{카테고리_이름} ARTHUR HOLM DB1Twin에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM DB1Twin 16 페이지.

OPTION 1

- Double-side tape or glue used can't be thicker than 0,2-0,25mm [0.008-0.01]

1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces

are touching each other in the whole length. (To make easier the adjustment the hight of the touch button can be

barely adjusted.)

2. Clean the top surface of the metal monitor housing and the

bottom surface of the Veneer.

3. Glue the Veneer. Double-side tape or glue can be used

(depending on the kind of materials are going to be jointed).

Veneer Guide (Optional)

The pressure applied

must not exceed 1 Kg

evenly distributed on

monitor surface.