ARTHUR HOLM DB1Twin Montaj Talimatları - Sayfa 10
İç Mekan Mobilyaları ARTHUR HOLM DB1Twin için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. ARTHUR HOLM DB1Twin 16 sayfaları.
OPTION 1
- Double-side tape or glue used can't be thicker than 0,2-0,25mm [0.008-0.01]
1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces
are touching each other in the whole length. (To make easier the adjustment the hight of the touch button can be
barely adjusted.)
2. Clean the top surface of the metal monitor housing and the
bottom surface of the Veneer.
3. Glue the Veneer. Double-side tape or glue can be used
(depending on the kind of materials are going to be jointed).
Veneer Guide (Optional)
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
10