dji PHANTOM 4 비행 매뉴얼 - 페이지 5

{카테고리_이름} dji PHANTOM 4에 대한 비행 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji PHANTOM 4 18 페이지.
dji PHANTOM 4에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (3 페이지)

페이지 인쇄
dji PHANTOM 4 비행 매뉴얼
Calibrations
Dji Phantom 4 - IMU
•
Choose a very flat surface for the Phantom 4 IMU calibration (very important)
Remove the propellers before you start the compass calibration
•
Have your batteries fully charged in the Phantom 4 quadcopter, the Remote Control and your tablet of smart cellphone
•
Next, start up the Phantom 4 Remote Controller
•
Start the DJI Go App
•
Start up the Phantom 4 quadcopter
•
In the DJI Go App, click on the "Camera" settings
•
Up in the left hand corner, click on the little quadcopter (attitude) button which is the main settings page
•
Scroll down and click on the "Advanced Settings"
•
Click on "Sensors"
•
Click on "IMU Calibration"
•
Click on "Start Calibrating"
•
•
A popup message will appear saying "Calibration Requires Approximately 5 Minutes. Do Not Move Aircraft During
Calibration"
Click Ok and the IMU calibration will start
•
Then next page will show you the IMU calibration progress. Stay on this page during the Phantom 4 IMU calibration.
•
When the calibration reaches 100%, a popup message will appear stating "Calibration Complete. Restart Aircraft"
•
Click ok
•
Power down and then restart the Phantom 4 to complete the calibration process
•
You will need to power down the Phantom 4 again and then put back on the propellers
•