dji Zenmuse X5 사용자 설명서 - 페이지 4

{카테고리_이름} dji Zenmuse X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Zenmuse X5 18 페이지. For inspire 1 pro
dji Zenmuse X5에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (11 페이지)

페이지 인쇄

INSPIRE 1 PRO User Manual

Gimbal

Gimbal Profile

The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture

stabilized images and video. The Gimbal can tilt the camera up to 120 degrees and rotate 360

degrees.

+ 30°

0°

-320°

-90°

+ 320°

Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note that

you cannot control the pan motion of the camera by default. Enable the "Master-and-Slave" mode and

set the remote controller to "Slave" state if you wish to control both the pan and pitch movement of the

camera.

Pan Control

Follow the instructions below to use the gimbal dial to control the pan movement of the gimbal:

1. Power on the aircraft and remote control, launch DJI GO app and enter "Camera" page.

2. Tap "RC Control Settings" icon and select either C1 or C2 customizable button as the gimbal pitch/

yaw switching button.

3. Select "Gimbal Pitch/Yaw" from the dropdown list.