Cleerline SSF-TKITE-100 매뉴얼 - 페이지 7
{카테고리_이름} Cleerline SSF-TKITE-100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cleerline SSF-TKITE-100 19 페이지. Fiber test kit
Cleerline SSF-TKITE-100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄1
2
Label Area: Light Source will read SM (Single Mode)
SM/
or MM (Multimode) depending on model. Choose
1
MM
SM for single mode testing (1310/1550nm) or MM for
multimode testing (850/1300nm).
Power On/Off: Press and hold for 1 second to turn the
unit on or off.
Auto Shut-Off Selection: While unit is on, press this
2
key quickly to turn the auto shut-off function on or off.
When auto shut-off is active the unit will automatically
shut off after ten minutes idle.
Wavelength Selection:
3
wavelength, shown in top left corner of screen.
Modulation
between continuous and modulated light.
4
Modulated light frequency: 0.27, 1.00, 2.00 KHZ.
Continuous light mode displays --- KHz (0 KHz).
Handheld Optical Light Source
Functions
: Press this key to switch modulation
7
Press this key to change the
3
4